170x125mm Silicone Pendant Mould - 12 Shapes

Non-stick flexible Silicone Mould suitable for resin, fondant moulding or for polymer clay.  If using for polymer it is easiest to remove the clay after pressed into the mould with a piece of unbaked polymer – just gently press onto the to flattened top of your shape and pull out the cab then remove from the cabochon. 

It is advised to use mold release agent with silicone moulds – even though the mould manufacturers say it is not required, in order to protect and extend the life of your mould it is recommended.

Size: 170x125mm outer

Mould will create the following shapes (top to bottom, left to right):

1^st Row:
36mm x 7mm deep Round Pendant/Cabochon (no hole)
35x19mm – Rectangle multi-level nugget effect Agate Effect cabochon/pendant (no hole)
37x26x7mm deep Half Round Pendant/Cabochon (no hole)
2^nd Row:
42x33x7mm deep Teardrop Cabohcon/Pendant (no hole)
39x19x7mm Rounded Rectangle Pendant with 1.5mm hole
32x20x7mm deep Teardrop Pendant/Cabochon (no hole)
3^rd Row:
35x27mm Natural Nugget Shape – multi-level (no hole)
39mm x 7mm deep Round Pendant Mould with 1.5mm hole
32x20x7mm deep Natural Stone Agate Multi-level Teardrop Pendant/Cabochon (no hole)
4^th Row:
32mm Natural Nugget Multi-level Shape Semi-Round Pendant/Cabochon (no hole)
38mm Natural Nugget Multi-level Shape Semi-Round Pendant/Cabochon (no hole)
37x26x7mm deep Multli-level Agate Nugget Style Half Round Pendant/Cabochon (no hole)