ICED ENAMELS

Use ICED Enamels®  to create beautiful effects on Metals to look as if they’ve been kiln fired enameled. Just brush the ICED Enamel medium onto a Bezel, wire or lightly sanded metal;  then sprinkle with our ICED Enamels®, fuse with a heat tool, then coat with ICE Resin®. Voila! the look of kiln-fired enameling without all the fuss!

Instructions:

1. Lightly Sand your metal bezel or Silhouette with sandpaper.
2. Apply thin coat of ICED Enamels® Medium to surface.
3. Sprinkle Iced Enamels® Powder onto surface.
4. Gently shake-off excess.
5. Melt Iced Enamels®  Powders with craft heat gun, warming the metal from the underside at first, as much as possible.
6. Build up additional layers of ICED Enamels®  as you like.
7. Let completely cool.
8. To seal, mix ICE Resin® per to manufacturer directions and apply a thin coat with disposable paint brush.
9. Let dry 6 to 12 hours.